Concrobium Calcium, Lime & Rust Remover - PRO

Concrobium^® Calcium, Lime & Rust Remover (CLR) is a non-corrosive, readily biodegradable solution that safely and effectively removes calcium, lime, rust and hard water stains with no toxic fumes/VOCs. It’s also septic safe.

Recommended Uses:

The solution is ideal for porcelain, acrylic, fiberglass, stucco, brick, cement, glass, chrome and stainless steel. Test on an inconspicuous section first. Note: May etch older surfaces. May return older cement to its original white appearance. Rinse thoroughly with water after use.

Do Not Use On: natural stone, marble, terrazzo, colored grout, painted/metallic glazed surfaces, plastic laminates, Formica^®, aluminum, pewter, copper, brass, zinc, steam irons, refinished tubs or any damaged or cracked surfaces.

How to apply:

Always test on an inconspicuous section first.

Spray directly on surface and wipe with brush or sponge as required. Rinse thoroughly with water. For tough stains allow product to dwell on the surface for a maximum of 2 minutes, then proceed as directed above. Repeat if necessary.

To descale: mix 1 part Concrobium Calcium, Lime & Rust Remover to 8 parts water. Rinse thoroughly. Repeat if necessary.